Commercial Fencing, Gates & Hand Rails in Burnaby — Strata, Industrial & High-Security (1970)

LS Fencing & Metal Work is a Fraser Valley commercial fencing and metal-fabrication contractor. We install high-security chain link, welded metal gates, ornamental strata perimeters, MMCD hand rails, and bollards across Burnaby and the surrounding metro vancouver. This page is a straight commercial brief — what we build in Burnaby, who we build it for, and how we structure a scope from site walk-through to turnover.

Our Burnaby work is property managers, general contractors, strata councils, industrial and warehouse operators, and public-sector projects that need a real commercial spec — 9-gauge galvanized mesh, top and bottom rails, welded cantilever gates, engineered hand rails, and a crew that can hold a schedule on a live site. Burnaby shares Vancouver's coastal rain pattern but sits slightly warmer inland — 1,100 mm of rain a year and less direct marine exposure than the West Side.

Burnaby is defined by ridges — Burnaby Mountain in the north, Capitol Hill, and the Burnaby Heights bluff — with flat blocks through South Burnaby and along the Fraser. On a commercial perimeter that dictates post depth, hardware spec, and how we mobilize the excavation kit.

Commercial fencing we install in Burnaby

Almost every Burnaby job we bid falls into one of five buckets. The spec, gauge, gate hardware, and site logistics change per bucket, and getting the right bucket picked at the site walk is what keeps the project on budget.

1. High-security industrial and warehouse perimeters

8-foot to 10-foot hot-dip galvanized chain link, 9-gauge mesh, top rail plus tension wire at the bottom, and either single or triple-strand barbed wire on 45° extension arms. Cantilever slide gates sized for tractor-trailer access, with keypad, card-reader, or LTE-controlled operators tied into the tenant's access system. Standard on industrial pockets across Burnaby — logistics yards, distribution centres, equipment rental yards, and utility compounds.

2. Strata townhouse and multi-family perimeters

Black vinyl-coated chain link or powder-coated ornamental steel picket, depending on the strata council's aesthetic requirements and budget. We work directly with strata property managers on Burnaby perimeter replacements — a phased scope so residents keep access to their units and the parking lot never fully closes. Written turnover with warranty documentation goes to the property manager on completion.

3. Welded custom gates — swing, cantilever, and barrier

Everything gated at Burnaby commercial sites is fabricated in our shop, not ordered in from a catalogue. Cantilever slide gates spanning 20 to 40 feet, swing gates on heavy-duty hinges rated for the actual leaf weight, and barrier gates and bollards for parking-lot access control. All welded to CWB-quality practice and finished with hot-dip galvanizing or shop-applied powder coat.

4. Ornamental steel and pool-code compliant perimeters

Powder-coated steel picket for strata entries, commercial storefronts, amenity building perimeters, and any pool or amenity enclosure that has to meet BC Building Code Part 9. Self-closing, self-latching gate hardware; no climbable horizontal rails on pool sides.

5. Metal hand rails, guard rails, and bollards

MMCD-spec galvanized hand rails for public walkways, ramps, and loading-dock access. Bollards — fixed, removable, and retractable — for parking-lot protection, storefront ram-raid mitigation, and access control at strata visitor entries. Fabricated in the shop, installed on our own excavation kit.

Materials-wise, a commercial Burnaby spec pushes us to hot-dip galvanized hardware end-to-end, 9-gauge fabric on high-security perimeters, black vinyl-coated chain link where aesthetics matter (strata, storefronts), and heavier gate posts than a residential catalogue would default to.

Who we work for in Burnaby

• Property management firms with Burnaby portfolios — strata perimeters, tenant improvements, incident-driven repairs.
• General contractors and construction managers on Burnaby commercial builds — perimeter chain link during construction, permanent fence and gate scope at project turnover.
• Industrial and warehouse operators — logistics yards, equipment yards, and utility compounds across Burnaby.
• Public-sector and institutional clients — schools, parks, transit, and municipal facilities.
• Owner-operators of regulated sites — cannabis production, cold storage, and secure-storage tenants that need audit-ready perimeter documentation.

Site conditions in Burnaby

Burnaby shares Vancouver's coastal rain pattern but sits slightly warmer inland — 1,100 mm of rain a year and less direct marine exposure than the West Side. On a commercial perimeter that translates into corrosion load, wind load on tall fabric-covered runs, and freeze-thaw at the base of every post. Every Burnaby spec we write assumes hot-dip galvanized hardware end-to-end — plain zinc-plated fasteners and pre-galvanized wire are false economies on a site expected to hold up for 20+ years.

Burnaby is defined by ridges — Burnaby Mountain in the north, Capitol Hill, and the Burnaby Heights bluff — with flat blocks through South Burnaby and along the Fraser. That's why we mobilize with our own Kubota mini-excavator and percussion post-drilling attachment. Contaminated fill, old slab, buried debris, and rock refusal are all common on Burnaby industrial sites — an outside sub-trade on a rented auger will stall a full-day dig. On rocky or slab-encumbered Burnaby sites we core through rather than punt to another day.

Codes, bylaws, and permitting in Burnaby

Burnaby regulates fences through Zoning Bylaw No. 4742. Standard height limits apply without a permit, and there are specific sightline rules at driveway and street intersections. Pool enclosures follow provincial building code.

On commercial and industrial Burnaby sites, height, sightline, and setback rules from the zoning bylaw combine with BC Building Code Part 9 (pool and amenity enclosures), WorkSafeBC requirements for edge-protection hand rails, and any tenant-specific security spec (e.g. audit-ready perimeters for regulated cannabis production, TSA/CATSA-equivalent standards on airside work). We coordinate the paperwork against the City of Burnaby — Fence permits & regulations at quote stage so nothing gets missed at inspection.

Burnaby neighbourhoods and industrial pockets we work in

Our Burnaby mobilizations cluster around the commercial and industrial nodes: Burnaby Heights, Capitol Hill, Brentwood, Metrotown, Edmonds, Highgate, South Slope. Whether it's a strata perimeter replacement in a townhouse complex or an 8-foot barbed perimeter around an equipment yard, we walk the site with the property manager or GC before quote — sightlines, existing services, gate swing radius, truck turning circles — so the price on paper matches the price at the invoice.

In-house welding shop — why it matters on Burnaby jobs

The single biggest reason property managers and GCs call us for Burnaby work is that our metal gates and hand rails are welded in our own shop, not ordered in from a wholesaler. A cantilever slide gate spanning a specific Burnaby entry gets fabricated to the actual measured opening, the actual hinge post spec, and the actual operator model — not to a stock catalogue size that has to be shimmed on-site. Repairs, retrofits, and one-off brackets go from measurement to install inside a week instead of the four to eight weeks a supplier catalogue takes.

• Custom cantilever and swing gates fabricated to measured openings
• Hot-dip galvanizing or shop-applied powder-coat finish
• MMCD-spec hand rails and guard rails for public walkways and loading docks
• Fixed, removable, and retractable bollards for access control
• Field repair welding — hinge replacement, gate frame straightening, post retrofit

How a Burnaby commercial job runs

• Day 0 — property manager, GC, or owner-op contacts us with a Burnaby scope.
• Day 1–5 — on-site walk-through with the site contact; existing conditions, gate operators, sightlines, and service locates flagged.
• Day 5–10 — written itemized quote with scope, materials, gauge, finish, gate specs, timeline, and warranty.
• Approval + BC 1 Call locates + coordination with tenant/site operations to schedule mobilization windows.
• Mobilize crew and excavation kit; posts set in concrete; gate frames fabricated in-shop in parallel.
• Install fabric, panels, rails, gates, operators, and hand rails; commissioning of any gate operator with the access-control vendor.
• Site clean, final walk-through with the site contact, warranty and turnover documentation issued.

Burnaby is close to Vancouver on pricing. Sloped and stepped installs on the ridge neighbourhoods add roughly 10–15% over a flat-ground quote for the same linear footage.

Why property managers and GCs pick us for Burnaby

• Family-run since 2011 — same crew, same shop, same phone number.
• In-house welding shop — every gate and hand rail fabricated to the measured opening.
• Own excavation equipment — no waiting on a sub-trade for post holes on your live site.
• WCB coverage, COR-track safety practices, and clean documentation for property-manager audit files.
• One point of contact from quote through turnover — the person who quotes your job is the person who runs the crew.
• Written itemized quotes — every line broken out so a strata council or GC can compare apples to apples.
• Warranty in writing — one year on labour, manufacturer coverage on materials.

Materials and specs we default to in Burnaby

Our default Burnaby commercial spec starts with hot-dip galvanized hardware end-to-end and adjusts up from there for site conditions. The bullets below are the specs we default to unless a site walk forces something different.

• Chain link fabric: 9-gauge, hot-dip galvanized after weaving, black vinyl-coated where aesthetics matter (strata, storefronts).
• Posts: schedule 40 pipe, hot-dip galvanized, 3" line posts and 4" terminal posts standard; heavier on gate posts and cantilever gate opposite-side rollers.
• Fasteners: hot-dip galvanized or stainless — never plain zinc-plated on any commercial ${name} job.
• Barbed wire: three-strand on 45° extension arms, standard on industrial and utility perimeters; omit or replace with smooth rail on strata and storefront work.
• Gates: welded in-shop, hot-dip galvanized or powder-coat finish, hardware rated for the actual leaf weight not the catalogue span.
• Hand rails: MMCD-spec galvanized pipe on public and loading-dock installations.

"Burnaby commercial fencing is a schedule problem as much as a materials problem. Our crew, our welding shop, and our excavation kit exist so your site doesn't wait on ours."

Ready to scope a specific Burnaby project — perimeter replacement, gate retrofit, hand rail package, or new-build turnover? Reach out for a site walk-through and a written itemized quote.